61 61 100 Removing and installing/replacing both windscreen wiper arms

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

61 6 060

IMPORTANT: After installation CHECK SETTING DIMENSION AND CONTACT ANGLE of the wiper arm.

Remove caps (1).

Release nuts underneath.

Tightening torque 61 61 2AZ .

Fig 1: Identifying Windscreen Wiper Arms Cap

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Risk of breakage!
Do not bend wiper arm when removing.

Detach windscreen wiper arm with special tool 61 6 060 .

IMPORTANT: Danger of loosening!
Observe tightening specifications without fail.

Fig 2: Removing Windscreen Wiper Arm Using Special Tool (61 6 060)

Courtesy of BMW OF NORTH AMERICA, INC.