61 31 274 Removing and installing/replacing switch for rear seat backrest folding
WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
Carefully pry out switch for rear seat backrest folding (1) with special tool 00 9 325 .
Disconnect plug connections behind.
Remove switch for rear seat backrest folding (1).
Installation:
Make sure switch for rear seat backrest folding (1) is correctly seated.