61 31 084 Removing and installing/replacing switch for automatic tailgate activation
WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
NOTE:
Graphic shows F01!
Lever switch for automatic rear lid actuation (1), with special tool 00 9 323 , sideways out of tailgate trim (2).
Unlock associated plug connection and disconnect. Remove automatic tailgate actuation switch (1).