54 12 Mechanical components, slide/tilt sunroof
WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - MECHANICAL COMPONENTS, SLIDE/TILT SUNROOF
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Glass slide / tilt sunroof panel to gate | F01 / F02 / F04 / F10 | M5x6 w/Washer | 5 ±0. 5 Nm | |
| F07 / F11 / F20 / F25 | 4. 5 Nm | |||
| 2AZ Cassette to body | F01 / F02 / F04 / F10 | Self-locking | 7. 6 Nm | |
| F07 / F11 / F20 / F25 | Screws, self-tapping | 5. 4 Nm | ||
| 3AZ Floating headlining to sliding rail | F01 / F02 / F04 / F10 / F11 | M5x6 | Observe screwing sequence | 2 ±0. 2 Nm |
| 4AZ Carriage, water channel, to connecting element | F01 / F02 / F04 / F10 | 3. 8 Nm | ||
| 5AZ Panorama glass roof rear section - active and passive elements | F07 / F11 / F25 | 5. 4 Nm | ||
| 6AZ Both floating roofliners to gate | F11 | 2. 0 Nm | ||
| 7AZ Stacker for floating roofliner | F11 | 2. 0 Nm | ||
| 8AZ Water gutter to glass lid mechanism | F11 | 2. 0 Nm | ||
| 9AZ Wind deflector to crossmember | F25 | Tighten screw with special tool 00 9 250 to 0. 8 Nm. | 0. 8 Nm | |
| 10AZ Stop screw | F11 | . | 2 Nm |