51-1 45 Trim, instrument trim panel
WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - TRIM, INSTRUMENT TRIM PANEL
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Dashboard support to console for steering column support, screw | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 / F25 | M8 | 21.5 Nm | |
| 2AZ Support for dashboard to A-pillar | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 / F25 | M8 | 21.5 Nm | |
| 3AZ Dashboard support to tunnel, screw | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 / F25 | M8 | 21.5 Nm | |
| 4AZ Trim panel, pedal mechanism, to dashboard support, screw | F01 / F02 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 / F25 | Replace screws | 8 Nm | |
| 5AZ Dashboard to support | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | 1.8 Nm | ||
| F25 | 8 Nm | |||
| 6AZ Folding compartment (driver's side) to dashboard | F01 / F02 / F03 / F04 / F07 | 2.4 Nm | ||
| 7AZ Handle recess to folding compartment (driver's side) | F01 / F02 / F03 / F04 | 1.5 Nm | ||
| 8AZ Support for dashboard to bulkhead | F25 | 21.5 Nm |