51 47 Floor-luggage compartment-engine compartment trim panel
WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - FLOOR-LUGGAGE COMPARTMENT-ENGINE COMPARTMENT TRIM PANEL
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Cargo cover frame to body | F07 | M8x22 | 17.5 Nm | |
| 2AZ Rear floor panel hinge in luggage compartment to body | F07 | 3.3 Nm | ||
| 3AZ Tail panel cover at top to cross member | F07 | 2 Nm | ||
| 4AZ Screw connection, lashing eyes | F07 / F11 | 6 Nm | ||
| F06 / F12 / F13 | 20.5 Nm | |||
| 5AZ Stud, rail cover | F07 | 6 Nm | ||
| 6AZ Screw connection, rail support | F07 | Replace screws. | 8 Nm | |
| 7AZ Cargo cover latch to body | F07 | Replace screws. | 8 Nm | |
| 8AZ Trim, cargo cover, middle | F07 | 1.8 Nm | ||
| 9AZ Lock/housing to cargo cover (middle) | F07 | 2.3 Nm | ||
| 10AZ Lock to retaining bracket | F07 | 25 Nm | ||
| 11AZ Lock striker to cargo cover (middle) | F07 | 8 Nm | ||
| 12AZ Mounting, cargo cover, to frame, cargo cover | F07 | 12 Nm | ||
| 13AZ Screw connection, underbody protection | F03 | 19 Nm | ||
| 14AZ Load area net cover mounting | F11 | 2.5 Nm | ||
| 15AZ Lashing rail to body | F25 | 12 Nm | ||
| 16AZ Mounting for roller cover | F25 | 7.6 Nm |