LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 335 (Integrated Suspension Systems - Tightening Torques) >> Electric Components >> 37 14 Electric components

37 14 Electric components

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - ELECTRIC COMPONENTS

  Type Thread Tightening specifications Dimension
1AZ Bracket, ride height sensor, to body F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 M6   8 Nm
2AZ Ride height sensor holder to rear axle support F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 / F25 M6   8 Nm
3AZ Ride height sensor to holder F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 / F25 M5   5 Nm
4AZ Sensor lever, ride height sensor to jointed rod F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 / F25 M6 Replace nut   8 Nm
5AZ Jointed rod to wishbone / trailing arm F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 / F25 M6 Replace nut 8 Nm
6AZ Control unit, Dynamic Drive / VDM, to A-pillar (inner) F01 / F02 / F06 / F07 / F10 / F11 / F12 / F13 / F18 Replace nut   3 Nm
7AZ Valve block to body F01 / F02 / F06 / F07 / F10 / F11 / F12 / F13 / F18 M6   8 Nm
8AZ Acceleration sensor to spring strut F25     8 Nm