Vibration absorber to rear axle differential, front right
WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.
Slacken nut (1).
Tightening torque 33 17 3AZ .
Remove vibration absorber (2).
Installation note:
Replace nut.
First, screw the rear axle differential to the rear axle support with the specified tightening torque.