33 55 Anti-roll bar
WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - ANTI-ROLL BAR
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Retaining bracket, anti-roll bar to rear axle support | F01 / F02 / F03 / F04 / F07 / F06 / F10 / F11 / F12 / F13 / F18 | M10 | Replace screws. | 56 Nm |
| F25 | M8 | Replace screw. | 34 Nm | |
| 2AZ Anti-roll bar link to anti-roll bar/swinging arm | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 / F25 | M10 | Replace nuts. | 56 Nm |
| F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | M12 | Replace nuts. | ||
| Jointing torque | 45 Nm | |||
| Angle of rotation | 45 ° | |||
| 3AZ Vibration absorber to anti-roll bar bracket | F01 / F02 / F06 / F07 / F10 / F11 / F12 | Replace screw. | 19 Nm | |
| 4AZ Anti-roll bar link to wheel carrier | F25 | M10 | Replace screw. | 56 Nm |