24 30 Hydraulic / electric control parts and controlling elements
WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - HYDRAULIC / ELECTRIC CONTROL PARTS AND CONTROLLING ELEMENTS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Valve body to transmission | GA6HP19TU / GA6HP26TU | M6 | 8 Nm | |
| 2AZ Valve housing to valve body | GA6HP19Z / GA6HP26Z / GA6HP32Z | M6 | 5 Nm | |
| 3AZ Input-and output-speed sensors to mechatronics | M6 | 12 Nm | ||
| 4AZ Mechatronics to transmission | GA8HP45Z / GA8HP70Z / GA8HP90Z / GA8P70H | M6x59, M6x20 | 8 Nm | |
| 5AZ Oil volume accumulator to transmission | GA8HP45Z / GA8HP70Z | M6x59, M6x20 | 8 Nm | |
| 6AZ Centring plate to transmission bell housing | GA8HP45Z / GA8HP70Z / GA8HP90Z | M8X74 | Jointing torque | 10 Nm |
| Torque | 90 ° |