13 51 Injection pump, control
WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - INJECTION PUMP, CONTROL
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ High-pressure pump to cylinder head cover | N63 B44 O 0 / N63 B40 O 1 / N63 B44 O 1 | M6 | Replace screws. Tighten bolts to final torque/angle in uniform increments of 90°. FOLLOW REPAIR INSTRUCTION! |
12 Nm |
TIGHTENING TORQUE SPECIFICATIONS - INJECTION PUMP, CONTROL
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ High-pressure pump to cylinder head cover | N63 B44 O 0 / N63 B40 O 1 / N63 B44 O 1 | M6 | Replace screws. Tighten bolts to final torque/angle in uniform increments of 90°. FOLLOW REPAIR INSTRUCTION! |
12 Nm |