11 23 Vibration damper
WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - VIBRATION DAMPER
| |
Type |
Thread |
Tightening specification |
Measure |
| 1AZ Hub to crankshaft (head surface oiled) |
N63 |
M18x1.5 |
Replace screw |
|
| 1. Jointing torque |
100 Nm |
| 2. Angle of rotation |
60 ° |
| 3. Angle of rotation |
60 ° |
| 4. Angle of rotation |
60 ° |