11 41 Oil Pump with Strainer and Drive
WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - OIL PUMP WITH STRAINER AND DRIVE
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Intake manifold to oil pump | N63 | M6 | 10 Nm | |
| 2AZ Oil pump to bearing cap | N63 | M8 | 24 Nm | |
| 3AZ Oil pump cover to housing | N63 | M6 | 10 Nm | |
| 4AZ Sprocket to oil pump | N63 | M10 | Important - left-hand thread | |
| 1. Jointing torque | 20 Nm | |||
| 2. Angle of rotation | 40 ° | |||
| 5AZ Oil pump sprocket to hub | N63 | M6 | 10 Nm | |
| 6AZ Oil deflector to oil pump | N63 | M6 | 10 Nm |