LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 311 (Steering And Wheel Alignment - Repair) >> Pump And Oil Supply >> 32 41 433 Removing and installing/replacing ARS expansion hose part 4 >> Notes

32 41 433 Removing and installing/replacing ARS expansion hose part 4: Notes

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required: 

WARNING: DANGER OF POISONING if oil is ingested/absorbed through the skin!
Risk of injury if oil comes into contact with eyes and skin!
IMPORTANT: Adhere to the utmost cleanliness. Do not allow any dirt to enter the hydraulic system.
Do not  draw off hydraulic fluid (risk of contamination).
Close off pipe connections with plugs. 32 1 270

Recycling: 

Catch and dispose of hydraulic fluid in a suitable container.

IMPORTANT: Pressure line and connections must be provided with suitable plugs 32 1 270 immediately after removal!

ARS expansion hose part 4 overview: 

Fig 1: Overview Of ARS Expansion Hose
G08475829Courtesy of BMW OF NORTH AMERICA, INC.
1 Line 1
2 Line 2
3 Line 3