33-5120 Device

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

0495851 335120 Device Minimum set: Mechanical tools MW

NOTE: For removing and installing output shaft in rear axle final drive. [Released]

Storage Location

C22

A22

B22

Fig 1: Identifying Device (0495851)

SI number

01 01 07 (333)

Consisting of:

= 0495853 Basic body
NOTE: Discontinued, only available via complete tool [cannot be ordered separately]
= 0495854 Screw
NOTE: (Knurled screw with synchronising key) [released]
= 0495855 Rod
NOTE: Discontinued, only available via complete tool [cannot be ordered separately]
= 0495856 Shaped element
NOTE: (Shaped element) Shaped element (half-shell) Discontinued, only available via complete tool [not available separately]
= 0495857 Shaped element
NOTE: [Released]
= 0496795 Shaped part
NOTE: For driving output shaft into rear axle final drive. [Released]
= 0496765 Shaped part
NOTE: For pressing output shaft out of rear axle final drive. [Released]

In conjunction with: 33 5 120