LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 299 (Rear Axle - Special Tools) >> Rear Axle >> 33-4190 Tool set

33-4190 Tool set

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

0492431 334190 Tool set Minimum set: Mechanical tools MW

NOTE: Disks/bushes for removing and installing ball joint on rear wheel carrier in combination with spindle 0 496 552 [released]

Storage Location

C15

SI number

01 06 94 (801)

Fig 1: Identifying Tool Set (0492431)
G08463125

Consisting of:

  1. = 0492432 Pipe
    NOTE: (support tube) For removing and fitting [released]
  2. = 0492433 Plate
    NOTE: (support plate) For removing and fitting [released]
  3. = 0492434 Synchronising key
    NOTE: For pulling out [released]
  4. = 0492435 Synchronising key
    NOTE: For installing [released]
scientia non olet · About LEMON Manuals