LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 299 (Rear Axle - Special Tools) >> Rear Axle >> 33-4140 Device

33-4140 Device

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

0492397 334140 Device Minimum set: Mechanical tools MW

NOTE: For removing rubber mount in rear axle support. [Released]

Storage Location

B8

A8

SI number

01 02 99 (417)

Consisting of:

Fig 1: Identifying Device (0492397)
G04739458
  1. = 0492398 Pipe
    NOTE: (Threaded tube) Discontinued, only available via complete tool [cannot be ordered individually]
  2. = 0492399 Shaped part
    NOTE: (Shaped part) 2 pieces Model series: E38, E39, E46 Discontinued, only available via complete tool [cannot be ordered individually]
  3. = 0492400 Shaped part
    NOTE: (Shaped part) [Discontinued]
  4. = 0492401 Rod
    NOTE: (Guide rod) [Discontinued]
  5. = 0492402 Rod
    NOTE: (Guide rod) With thread dog point [released]
  6. = 0492403 Plate
    NOTE: (Fixing plate) Discontinued, only available via complete tool [cannot be ordered individually]
  7. = 0492404 Synchronising key
    NOTE: (Synchronising key (2 x)) With screws - model series: E38, E39, E46 Discontinued, only available via complete tool [cannot be ordered individually]
  8. = 0492405 Shaped part
    NOTE: (Shaped part) 2 pieces Model series: E39/2, E65, E67, RR1 [released]
  9. = 0492406 Synchronising key
    NOTE: (Synchronising key (2 x)) With countersunk screw - model series: E39/2, E65, E67, E87 [released]