33-4120 Device

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

0492388 334120 Device MW

NOTE: For removing and installing the ball joint in the wishbone [Discontinued]

SI number

01 01 89 (989)

Consisting of:

= 0492389 Shaped element
NOTE: For positioning when pressing out the ball joint [Discontinued]
= 0492390 Bush
NOTE: (Pressure bushing) For pressing the ball joint out of the wishbone [Discontinued]
= 0492391 Shaped element

Fig 1: Identifying Device (0492388)

NOTE: For positioning the wishbone when pressing in the ball joint [Discontinued]
= 0492392 Bush
NOTE: (Pressure bushing) For pressing the ball joint into the wishbone [Discontinued]