LEMON Manuals
: Even more car manuals for everyone
Home
>>
BMW
>>
2014
>>
M6 2D Convertible, Standard Trans
>>
Repair and Diagnosis
>>
External Pages
>>
Different car
>>
Section 299 (Rear Axle - Special Tools)
>>
Rear Axle
>>
33-3334 Holding sleeve
33-3334 Holding sleeve
WARNING:
This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.
0492326 333334 Holding sleeve Minimum set: Mechanical tools MW
NOTE:
(Spacer sleeve) For installing the ball joint, series: E31, E36, E38, E39, E46, E65, E66, E85 [released]
Fig 1: Identifying Holding Sleeve (0492326)