33-1380 Device

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

0492136 331380 Device MW

NOTE: For determining the installation dimension of the bevel drive pinion in the rear axle differential [Discontinued]

Consisting of:

= 0492137 Holder
NOTE: (Dial gauge holder) [Discontinued]
= 0492138 Washer
NOTE: (Measuring disc) [Discontinued]

Fig 1: Identifying Device (0492136)