24-5490 Holding sleeve

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

0491789 245490 Holding sleeve Minimum set: Mechanical tools MW

NOTE: (Sliding sleeve (5 pieces)) For prevention of damage to the radial sealing ring while sliding onto the gearshift shaft [Released]

SI number

01 02 95 (896)

Fig 1: Identifying Holding Sleeve (0491789)

Courtesy of BMW OF NORTH AMERICA, INC.