24-2310 Device

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

0493156 242310 Device MW

NOTE: (Device) Tool set for dismantling and fitting the R gear piston. For dismantling and assembling the transmission for "Sealing the intermediate plate". [Discontinued]

SI number

01 22 97 (239)

Fig 1: Identifying Device (0493156)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

= 0493157 Plate
NOTE: (Pressure plate) For removing and installing the spring cup [Discontinued]
= 0493158 Spindle
NOTE: (Spindle with pressure plate) Spindle M14x1.5, nut M14, pressure plate and washer / For removing and installing the spring cup [Discontinued]
= 0493159 Pin
NOTE: (Guide pin (2 pieces)) For fixing the gaskets and the intermediate plate on the intermediate case [Discontinued]
= 0493160 Bush
NOTE: (Slip bush) For installing the piston in the cylinder of the intermediate plate [Discontinued]