24-1010 Holding sleeve
WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.
0491662 241010 Holding sleeve MW
NOTE:
(Assembly sleeve) For removing the disc set (4-gear) and for pressing in the needle bearing in the oil pump housing (A5S 560Z) [Discontinued]
Storage Location
X5
Courtesy of BMW OF NORTH AMERICA, INC.