23-3150 Tool

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

0494410 233150 Tool Minimum set: Mechanical tools MW

NOTE: (Tool set) For removing and installing the radial shaft seal of the drive shaft. Transmission: GS6-37BZ / DZ (H transmission) [Released]

Storage Location

C44

SI number

01 10 02 (907)

Fig 1: Identifying Tool (0494410)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

= 0494411 Puller
NOTE: [Discontinued]
= 0494412 Mandrel
NOTE: (Drift) [Discontinued]