23-3010 Device

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

0491600 233010 Device MW

NOTE: For mounting the output flange on the output shaft [Discontinued]

Storage Location

B16

SI number

01 10 93 (689)

Consisting of:

= 0491601 Spindle
NOTE: (Adapter spindle) [Discontinued]

Fig 1: Identifying Device (0491600)
Courtesy of BMW OF NORTH AMERICA, INC.
= 0491602 Holding sleeve
NOTE: (Pressure sleeve) Can no longer be ordered separately. Only available as part of set 11 5 330 = 83 30 0 495 127. [Not available separately]
= 0491603 nut
NOTE: (Thrust nut with bearing) [Discontinued]