23-2060 Puller

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

0491553 232060 Puller MW

NOTE: (Rillex ball bearing pull-out tool 6306) For pulling out the grooved ball bearing from the drive shaft and output shaft [Discontinued]

Consisting of:

= 0491554 Claw
NOTE: (Claw for Rillex 6306 (8 pieces)) [Discontinued]

Fig 1: Identifying Puller (0491553)
Courtesy of BMW OF NORTH AMERICA, INC.
= 0491555 Holding sleeve
NOTE: (Union sleeve) [Discontinued]
= 0491556 Spindle
NOTE: (Pressure spindle) [Discontinued]