23-2050 Puller

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

0491549 232050 Puller MW

NOTE: (Rillex ball-bearing puller 6205) For pulling out the grooved ball bearing from the transmission countershaft and the transmission output shaft [Discontinued]

Consisting of:

= 0491550 Claw
NOTE: (Claw for Rillex 6305 (8 pieces)) [Discontinued]

Fig 1: Identifying Puller (0491549)
Courtesy of BMW OF NORTH AMERICA, INC.
= 0491551 Holding sleeve
NOTE: (Union sleeve) [Discontinued]
= 0491552 Spindle
NOTE: (Pressure spindle) [Discontinued]