23-2010 Puller

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

0491540 232010 Puller MW

NOTE: (Rillex ball bearing extractor 6206 E) 8 ball bearings with plastic cage - For pulling out the grooved ball bearing of the transmission drive shaft [Discontinued]

Consisting of:

= 0491541 Claw

Fig 1: Identifying Puller (0491540)
Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: (Claw for Rillex 6206 E (8 pieces)) [Discontinued]
= 0491542 Holding sleeve
NOTE: (Union sleeve) [Discontinued]
= 0491543 Spindle
NOTE: (Pressure spindle) [Discontinued]