23-2000 Puller

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

0491536 232000 Puller MW

NOTE: (Rillex ball bearing extractor 6206) 9 ball bearings with steel cage - For pulling out the grooved ball bearing of the transmission drive shaft [Discontinued]

Consisting of:

= 0491537 Claw
NOTE: (Claw for Rillex 6206 (9 pieces)) [Discontinued]

Fig 1: Identifying Puller (0491536)
Courtesy of BMW OF NORTH AMERICA, INC.
= 0491538 Holding sleeve
NOTE: (Union sleeve) [Discontinued]
= 0491539 Spindle
NOTE: (Pressure spindle) [Discontinued]