23-1440 Holding sleeve

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

0491529 231440 Holding sleeve MW

NOTE: For pressing the bearing bush and the bearing inner race onto the output shaft, and for driving out the output shaft bearing (S5D 310Z) [Discontinued]

Storage Location

Fig 1: Identifying Holding Sleeve (0491529)

Courtesy of BMW OF NORTH AMERICA, INC.