23-0180 Ring

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

0493419 230180 Ring Minimum set: Mechanical tools MW

NOTE: (Impact ring with sliding sleeve) For fitting the radial shaft seal to the input end - F transmission [released]

Storage Location

B16

SI number

01 14 99 (482)

Consisting of:

Fig 1: Identifying Ring (0493419)

Courtesy of BMW OF NORTH AMERICA, INC.

= 0493424 Ring
NOTE: (Impact ring) Discontinued, only available via complete tool [cannot be ordered individually]
= 0493425 Holding sleeve
NOTE: (Sliding sleeve) [discontinued]