13-5250 Puller

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

0493321 135250 Puller Minimum set: Mechanical tools MW

NOTE: For pulling injector nozzles and injectors out of the cylinder head [Released]

Storage Location

A11

B11

SI number

01 06 98 (306)

Consisting of:

Fig 1: Identifying Puller (0493321)

Courtesy of BMW OF NORTH AMERICA, INC.

4 = 0493379 Claw
NOTE: (Clamping claw) For removal of injector nozzles / engine: M57 [discontinued]
1 = 0493338 Rod
NOTE: (Guide rod) [Released]
2 = 0493339 Bush
NOTE: (Threaded bush) [released]
3 = 0493340 Weight
NOTE: (Weight) [released]
5 = 0495579 Adapter
NOTE: For removing steering shaft on E85. See SI 01 11 06 (265) [Released]