13-0190 Fitting aid

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

0495756 130190 Fitting aid Minimum set: Mechanical tools MW

NOTE: (Installation set) For removing and installing the Teflon rings on the injector. [Released]

Storage Location

C19

SI number

01 20 06 (299)

Consisting of:

Fig 1: Identifying Fitting Aid (0495756)

Courtesy of BMW OF NORTH AMERICA, INC.

5 = 0495761 Fitting aid
NOTE: (Installation cone) [Released]
4 = 0495760 Holding sleeve
NOTE: (Assembly sleeve 3) [Released]
3 = 0495759 Holding sleeve
NOTE: (Assembly sleeve 2) [Released]
2 = 0495758 Holding sleeve
NOTE: (Assembly sleeve 1) [Released]
1 = 0495757 Pliers
NOTE: [Released]