11-9450 Holder

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

0493926 119450 Holder Minimum set: Mechanical tools MW

NOTE: (Counter support with socket and needle) For counter support of crankshaft when releasing/tightening down central bolt [released]

Storage Location

A45

SI number

01 14 01 (766)

Consisting of:

Fig 1: Identifying Holder (0493926)

Courtesy of BMW OF NORTH AMERICA, INC.

2 = 0494228 Washer
NOTE: Height 22.5 mm with hexagon screw [released]
3 = 0494229 Needle
NOTE: [Released]
5 = 0494317 Washer
NOTE: Height 10 mm with hexagon screw [released]
1 = 0494227 Lever
NOTE: [Released]
4 = 0494230 Socket WAF 46
NOTE: (Socket, AF 27) [released]