LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 291 (Engine - Special Tools) >> Engine >> 11-1350 Holding sleeve

11-1350 Holding sleeve

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

0490743 111350 Holding sleeve MW

Replaced by: 0490744

NOTE: (Assembly sleeves) For fitting the valve stem seal - Replaced by 11 1 360 (0 490 744) [replaced]