LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 263 (Engine - Repair - F01/F02) >> 1153 Thermostat And Connections >> 1153000 Removing and installing/replacing supplementary coolant pump for exhaust turbocharger (N63) >> Necessary preliminary work

Necessary preliminary work

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2014 BMW Alpina B7L, 2014 BMW Alpina B7, and 2013 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

Unclip coolant hose (1) from bracket (3) and lay in direction of arrow to one side.

Unfasten screws (2).

Tightening torque 11 51 4AZ .

Fig 1: Identifying Coolant Hose And Bracket
G06888825Courtesy of BMW OF NORTH AMERICA, INC.
IMPORTANT: Risk of damage! 
Coolant emerges when the coolant hoses are detached from the auxiliary water pump (3).
Cover surrounding components and plug connections with suitable apparatus

Release hose clamp (5) with a suitable tool.

Installation note: 

Fig 2: Identifying Auxiliary Water Pump, Coolant Hose And Hose Clamp
G06888826Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals