12 00 Removing and Installing/Replacing Ignition Coil Cover (N55)

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Pull Ignition Coil Cover (1) Off of Rubber Mounts and Remove In Direction of Travel.

Release Engine Oil Cooler Lines From Ignition Coil Cover If Necessary.

Fig 1: Removing Ignition Coil Cover

Courtesy of BMW OF NORTH AMERICA, INC.