11 00 Mounting Engine On Assembly Stand (N63O1)
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools Required:
- 00 2 300
- 11 0 020
- 11 8 930
- 11 8 931
- 11 8 932
WARNING:
Remove Engine with Hoist and Special Tool 11 0 020.
Fit Special Tool 11 8 930 On Engine.
Engine Weighs Approx. 280 Kg.
Necessary Preliminary Tasks:
- Fully Remove Front Axle Together with Engine.
- Remove Engine From Front Axle. Refer To Procedure for:
- VEHICLE WITH GA8HP70Z TRANSMISSION ,
- VEHICLE WITH GA8HP70Z TRANSMISSION (WITH AWD) , or
- VEHICLE WITH GA6HP26Z TRANSMISSION (WITH AWD) .
- Clean Contact Surfaces.
Use Special Tool 11 8 931 To Mount Special Tool 11 8 932.
Insert Screws (1 and 2).
Tightening torque: 11 11 9AZ .
Use Special Tool 11 8 931 To Mount Engine On Special Tool 00 2 300.
Tightening torque: 11 11 10AZ .
Graphic Shows Engine N63.