11 13 000 Removing and installing, sealing or replacing oil sump (N20) RWD
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Drain and add ENGINE OIL .
- Lower FRONT AXLE .
Disconnect plug connection on oil level sensor.
Release bolts along line (1).
Tightening torque: 11 13 3AZ .
Remove synthetic oil pan in downwards direction.
Assemble engine.