11 61 086 Removing and installing/replacing mixing tube for intake air (N57 Diesel)

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work:

Reset adaptation value with diagnosis system.
Remove THROTTLE BODY .

Release screws (1).

Unfasten screws (2).

Disconnect plug connection (3).

Remove mixing tube.

Fig 1: Identifying Plug Connection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Replace O-ring (1).

Replace gasket (2).

Fig 2: Identifying O-Ring And Gasket

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Pay attention to mounting lugs (1).

Remove mixing tube in direction of arrow.

Fig 3: Identifying Mounting Lugs

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.