11 61 365 Removing and installing/replacing front left charge air duct (N55)

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove INTAKE PORT .
Remove front UNDERBODY PROTECTION .

Release screw (1).

Tightening torque 17 10 4AZ .

Fig 1: Identifying Screw On Fan Cowl

G09875051

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock snap fastener (1).

Detach charge air duct (2) from charge air cooler connection (3).

Installation note:

The seal inside the snap fastener must be coated with anti-friction agent.

Charge air duct (2) must snap audibly into place.

Fig 2: Identifying Charge Air Duct, Charge Air Cooler Connection, And Snap Fastener

G09846232

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten hose clamp (2).

Release charge air duct (3) from gaiter (1).

NOTE: Remove charge air duct (3) in upward direction by simultaneously turning counter-clockwise (see direction of arrow).

Fig 3: Removing Charge Air Duct

G09875053

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.