LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1119 (Cylinder Head & Flywheel - Repair) >> Cylinder Head >> N20 Engine >> 11 12 040 Removing and installing all ignition coils and injector wells (N20)

11 12 040 Removing and installing all ignition coils and injector wells (N20)

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

Release screws (1).

Tightening torque: 11 12 6AZ .

Remove injector slot (2).

Fig 1: Identifying Screws And Injector Slot
G09919273Courtesy of BMW OF NORTH AMERICA, INC.

Check fitting bushes (1) for damage.

Installation note: 

Replace gasket (2).

Fig 2: Identifying Bushes And Gasket
G09919274Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.

scientia non olet · About LEMON Manuals