Build-up of partial vacuum
WARNING: This page does not describe the selected car, but rather 45 other vehicles, including the 2016 BMW M5, 2016 BMW 550i xDrive, 2016 BMW 550i, 2016 BMW 535i xDrive, and 2016 BMW 535i. However, it is still accessible from the selected car via links, so may be relevant.
For the first stage, the largest portion of the spatial enlargement (discharging) is used, thus building up the partial vacuum quickly for the brake servo. Only in the last section is the opening released for the additional loads, i.e. the second stage is activated. Building up the partial vacuum for the additional loads takes longer, as shown in the following diagram.
| Item | Explanation |
|---|---|
| 1 | Partial vacuum |
| 2 | Time |
| 3 | Delivery rate for additional load |
| 4 | Supply rate for brake servo |
We can assume no liability for printing errors or inaccuracies in this document and reserve the right to introduce technical modifications at any time.