LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1105 (Functional Description - F10 - Transmission & Driveline System, Exterior Lighting, Towing, Cruise Control System) >> Towing - Functional Description >> Trailer lighting and fully automatic trailer tow hitch >> Notes

Trailer lighting and fully automatic trailer tow hitch: Notes

WARNING: This page does not describe the selected car, but rather 45 other vehicles, including the 2016 BMW M5, 2016 BMW 550i xDrive, 2016 BMW 550i, 2016 BMW 535i xDrive, and 2016 BMW 535i. However, it is still accessible from the selected car via links, so may be relevant.

All vehicles with a trailer hitch are equipped with a trailer module (AHM). The trailer module (AHM) is an additional control unit for light control in the vehicle. The trailer module (AHM) is necessary to operate the trailer power circuits separately from the circuits of the towing vehicle. This enables separate light monitoring of the trailer lighting. The trailer module (AHM) is also used for trailer detection.

In addition, the trailer module (AHM) controls and monitors the function of the fully automatic trailer tow hitch.

NOTE: Trailer module (AHM) with integrated function  of the control unit for the fully automatic trailer tow hitch. Thus there is no separate control unit for the fully automatic trailer tow hitch.

The fully automatic trailer tow hitch is operated using a button in the luggage compartment.

The faults are stored in the trailer module (AHM). If necessary, a Check Control message is generated and displayed in the instrument cluster.

Depending on the series, there are two versions of the fully automatic trailer tow hitch available (manufacturers: Oris and Westfalia).