Parking light

WARNING: This page does not describe the selected car, but rather 45 other vehicles, including the 2016 BMW M5, 2016 BMW 550i xDrive, 2016 BMW 550i, 2016 BMW 535i xDrive, and 2016 BMW 535i. However, it is still accessible from the selected car via links, so may be relevant.

The turn signal/high-beam switch can be used to activate the side lights whenever the status "Terminal 30 on" is present. The turn signal/high beam switch must be pressed to the left or right position for longer than half a second. This time delay prevents the parking lights from being switched on inadvertently, for instance, when the driver brushes against the turn signal/high beam switch when exiting the vehicle.

The footwell module (FRM) implements the side lights function by switching on the side lights and the tail light on the selected side of the vehicle. The footwell module (FRM) receives the command requesting activation of the side lights from the steering column switch cluster (SZL). The central gateway module (ZGM) transmits the signal to K CAN2.