Adaptive Dynamic Brake Control

WARNING: This page does not describe the selected car, but rather 45 other vehicles, including the 2016 BMW M5, 2016 BMW 550i xDrive, 2016 BMW 550i, 2016 BMW 535i xDrive, and 2016 BMW 535i. However, it is still accessible from the selected car via links, so may be relevant.

The adaptive brake assist is a function of the ICM. The adaptive dynamic brake control is only available on vehicles with Active Cruise Control with Stop & Go function.

The adaptive dynamic brake control provides its greatest benefit in emergency braking situations. The long-range sensor recognizes heavy braking in the preceding vehicle. Dynamic Brake Control assists in braking in a manner that is most effective in preventing a collision.

The following functions are available:

Precharging the brake system
Adaptation of a number of parameters for the braking functions in the DSC according to the situation
Visual alert for the driver in the instrument cluster when initial warning status is present
Visual and acoustic warning for the driver in the event of an acute warning

The adaptive Dynamic Brake Control can be switched on using the corresponding button in the driver assistance control box.

The point in time of the advance warning can be selected using the button (2 stages possible).

The adaptive dynamic brake control can also be switched on without activating the ACC Stop & Go function.