51 16 227 Removing and installing/replacing trim on center console at side left or right

When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).

Necessary preliminary tasks:

Remove rear seat
Completely move the front seat down and to the back and fold backrest to the rear.

NOTE: Cover the armrest in the marked area (1) to protect the armrest from scratches.

Unclip the cover on the side of the center console (2) from back to front and carefully feed it out toward the top.

Fig 1: Locating Center Console

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Driver's side only:

Retaining clips (1) must not be missing or damaged.

Fig 2: Identifying Retaining Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Driver's side only (L):

Retaining clips (2) must not be missing or damaged.

Replacement

Modify clamp clamps (1).

Fig 3: Identifying Retaining Clips And Clamps
Courtesy of BMW OF NORTH AMERICA, INC.