51 16 163 Removing and installing/replacing rear center console cover

Special tools required:

When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).

If necessary, open center armrests (1).

Unclip and remove rear center console cover (2) toward the top.

Fig 1: Identifying Rear Center Console Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Retaining clips (1) of rear center console cover (2) must not be damaged or missing.

Replacement

Modify retaining clips (1) of rear center console cover (2).

Fig 2: Identifying Retaining Clips Of Rear Center Console Cover

Courtesy of BMW OF NORTH AMERICA, INC.