51 16... Removing and installing/replacing side trim panels (carpet) on center console on left or right

Release screw (1).

Pull the trim panel (2) forward until the retaining clips disengage.

Fig 1: Pulling Trim Panel

Courtesy of BMW OF NORTH AMERICA, INC.

For F12/F13/F06 only: 

Lever clip (1) out of the front of the center console support (2).

Fig 2: Identifying Clip And Center Console Support

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Retainers (3) must be correctly seated in panel guides (1).

For F12/F13/F06 only: 

Clip (2) must not be damaged or missing.

Fig 3: Identifying Retainers And Panel Guides

Courtesy of BMW OF NORTH AMERICA, INC.