51 71 482 Removing and installing/replacing left or right tension strut (on rear axle)

IMPORTANT: Observe SAFETY INFORMATION for raising the vehicle
Driving without the trailing link is not permitted!

Release expanding rivet (1) and remove cover (2).

Fig 1: Identifying Expanding Rivet And Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Release expansion rivet (1).

Release screws (2 to 4).

Remove trailing link (5).

Installation note:

Replace all bolts.

Tighten all screws to specified torque and angle of rotation.

Fig 2: Identifying Trailing Link, Expansion Rivet And Screws

Courtesy of BMW OF NORTH AMERICA, INC.